Painted Pallet Wood Snowflakes



pallet-wood-snowflakes-007

If you love pallets, have a bunch of scrap pallet wood sitting around (or even just a few pieces), would like a quick and easy project…I may have just the project for you…Painted Pallet Wood Snowflakes!

pallet-wood-snowflakes

Start out by gathering your extra pallet wood or other reclaimed wood.

Create squares from your pallet wood.  With the wider width pallets, I used two pieces to create a  11 inch square.  With the thinner pallet wood, I used four pieces to make a larger 13 inch square.  On the back, nail or screw on thinner pallet braces to hold your pieces together.

pallet-wood-snowflakes-001

Start layering on the chalk paint.  The first layer was black chalk paint (that’s already covered up) followed by teal as shown above.  

You don’t have to be particularly neat, just try to smooth out any paint drips.

pallet-wood-snowflakes-002

The teal was followed by a final chalk paint layer of light blue.

pallet-wood-snowflakes-004

Time to attack the pallets with an electric sander.  I revealed a little bit of the layers in the center but most of the sanding was focused on the edges blending all three layers of the chalk paint until you don’t see any hard edges where the paint lines ended.

To make the snowflakes, find the center point of the pallets and use a pencil to make a horizontal line leaving about an inch border on the sides.

pallet-wood-snowflakes-005

I’m told that a typical snowflake has 6 points.  Trying to draw equal angles free hand was not working and I couldn’t find any of the protractors I’ve bought over the years for my kids geometry classes, so I ended up cutting a 30 degree angle triangle with my miter saw. That little piece was a perfect pattern for all the snowflakes.

Use the length of the first line you drew to make all of the snowflake points the same length.

pallet-wood-snowflakes-006

If you can’t picture a snowflake design there is help.  I found tons here. There are more snowflakes there than you will ever need in a life time.

Outline your snowflake lines in white paint.

pallet-wood-snowflakes-007

It doesn’t really matter what you do with each snowflake point, but whatever you do, repeat the same design on all 6 of the points.

pallet-wood-snowflakes-008

pallet-wood-snowflakes-009

pallet-wood-snowflakes-010

painted-pallet-wood-snowflakes-001

I did these as wall art but I could also envision them as smaller square coasters. You may want to keep these in mind if you make homemade gifts this year.

Stay inspired.  Have a great week.

Shared at Link Party Palooza,

DIY Salvaged Junk Projects, Metamorphosis Monday,

Wow us Wednesdays,

5 Comments

Leave a Reply to Ann Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.