Antique Clothes Wringer Coffee Table



Upcycled Antique Clothes Wringer and Pallets Coffee Table-

While shopping with my daughter-in-law, Steph, at a yard sale last summer we spied this great rack. I had no idea what it was, but I saw coffee table!

I didn’t buy it.  I was just about to ask the price when Steph tells me that her dad had one just like it in his basement.  It was leftover furniture from her grandmother who had used it as a drying rack.   At least I think that was the story…all I heard was blah, blah, blah..you can have it.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

It’s been 8 months but I finally had my hands on this piece of history. I still see a coffee table, but I didn’t quite remember the support bar in the middle.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

The bench, wash stand, drying rack…whatever you want to call it…had a great design.  When it was not in use it folds up almost flat.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

I had a feeling that there may have been more to this bench than meets the eye. What gave me the first clue was that the writing was cut off and the cut was not quite smooth on the middle support.

Upcycled Antique Clothes Wringer and Pallets Coffee Table.bmp

After a little research, I found that this wasn’t just a bench, it used to have a wringer attachment in the middle. What I think you did with it is, you would have two buckets, one on either side.  One side had wet clothes, send the clothes thru the wringer to another bucket on the other side.

I also found where you can still buy a “modern” wringer washtub stand.  Kind of cool, but I’m pretty sure I’m not going to give up my electric washer and dryer.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

There wasn’t any varnish left to strip, but the wood on this poor thing was crying out for help. Since I had a container of Restor-a-finish, I thought I would start there.  Look how much prettier the wood looked after just rubbing this stuff on with a rag.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

In order to make this guy into a coffee table, I needed a flat surface and those brackets in the middle were definitely in the way. 

The brackets weren’t just screwed on…are those rivets?  Whatever they were they had to be cut off with a metal cutter.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

The bracket was finally off.  All the rusty looking metal was painted black but I left the galvanized metal corner brackets alone.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

A little tall for a coffee table, so all the legs were chopped off 2 inches, the same angle as they were before.  The middle support was also cut down to the same level as the new bench. I also cut the side pieces  where they met the middle support,  so the new coffee table wouldn’t be quite as long as the old bench.

What you don’t see from this picture is a dowel that was on the upper part of the wringer frame was moved to the lower part of the middle support.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

For extra support, nailed a couple of brackets to the inside of the frame before screwing back on the outer, more decorative brackets.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Frame is complete, level, and surprisingly sturdy. I did end up staining the inside brackets to more closely match the frame.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Moving onto the top, I started out by cutting a frame out of 1×4 lumber.  I cut 2, 43″ and 2, 19″ pieces, mitered at the corners. You could also just make straight cuts, the choice is yours.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Before attaching the frame I beat it up a little.  With the base being so old, I wanted the frame to have a little wear and tear too.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

The frame was attached with wood glue and finishing nails then stained a dark walnut.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Pallet wood was cut to fit inside the frame. Try to find all the same thickness of pallet wood, though they can be different widths.

The pallet wood was attached with finishing nails from a nail gun.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Sand the top to remove any splinters and uneven wood.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Some blue chalk paint was roughly painted on. 

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Painted over my blues with black chalk paint.

Clothes wringer coffee table Pallet top

Sanded, to reveal some of those layers, then waxed.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

I wasn’t even gonna finish this side of the top but I really liked the wood so why not give a choice.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

For this side, I skipped the blues and went directly to black chalk paint over the 1×4 edge.

The sander came back out to sand this side of the pallets and to give the black painted edge a little worn look.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

The pallets were finished with a mixture of clear wax, a little bit of dark wax and a couple dabs of black paint. All were painted on then the excess was rubbed off with a rag.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

This is the coffee table as I originally intended the top to sit.  A perfect height to put your feet up when sitting on the sofa.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Upcycled Antique Clothes Wringer and Pallets Coffee Table

And this is the top upside down.  A little bit taller, not quite the feet propping height, but perfect to hold stuff.  What I like about the top this way is that the 100 year old brackets are visible.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Since the patent was so visible on the frame I had to look it up.

Pinterest • The world’s catalog of ideas - Google Chrome 5122016 24201 PM.bmp

Even though the patent number is huge it was only referring to the locking brace in the corner of the bench.

If you’re curious and want to look up your own patent, check out my post Vintage Patent Art Work from a couple of months ago.

Upcycled Antique Clothes Wringer and Pallets Coffee Table

Upcycled Antique Clothes Wringer and Pallets Coffee Table

If she wants it, the table will have to go back to Steph, an heirloom piece that should stay in her family. And if she decides she likes one side of the table more than the other it can be secured with metal straps so it doesn’t slide.

I did a little something else with this coffee table check it out here, here’s a hint,  it’s very kid friendly.

If you need more inspiration you can check out my gallery of coffee table and side tables here.

 

 

 

Shared at Metamorphosis Monday, Inspire me Tuesday,

Wow us Wednesday,  Talk of the Town, Share your Cup Thursday,

The DIY Collective, Handmade hangout, The Painted Drawer,

Friday Furniture Fix, Share it One More Time, Saturday Sparks,

Sweet Inspiration, Sunday Showcase, Silver Pennies Sundays,

Be Inspired Tuesday, Dream to Reality, DIY Salvaged Junk,

I was featured at

featured-button1FFF feature button 250x250_zps1dj53s4v

13 Comments

Leave a Reply to Great Ideas -- Farmhouse Projects Part Two! Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.