Primitive Junk Angel #2


Junk Angel made from reclaimed wood, broken tile, doorknob plate 001

I enjoyed making my first junk angel so much I just had to make another. I even have a couple more in the works, so watch out.

Primitive Junk Angel

If you remember, my first junk angel came about when my oldest son, Keith, gave me some strange looking metal objects for my birthday which eventually turned into angel wings.

Salvaged Rusty Parts

And with my ebay find of these beautiful rusty bits and pieces, I now have enough junk to make a whole family of angels. You know what they say about one mans trash being another mans treasure…this is treasure all the way.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

To get the angel wings started, drew a rough wing on paper and cut out. Traced around the wing onto some old fencing (twice).  The pattern was then cut out with a jigsaw.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

My wing broke on me when cutting so it’s being glued and clamped here.

As for the rest of the angel, this is the time to assemble all the bits and pieces. The hinges, halo and legs were all from my box-o-junk. The beadboard body was from a salvage yard.  I had already used a few pieces of the same beadboard on my reclaimed wood bed tray. The metal around the neck and lower hem were from a piece of metal, rusting in the woods. (I have no idea what they were used for). And the door knob base plate was from my oldest sons wedding…they were part of doorknob table numbers.

The arms are just a piece of dowel sanded at the ends for shoulders and hands.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

The head was cut from a piece of spindle that I had left over from the same bed tray that the beadboard was from.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

Every angel needs beautiful wings, so this angel got wings made from bits and pieces of old dishes that I’ve picked up in my travels.  If your pieces are too big, cover them with a rag, and break them down a bit.

hint:   If you’re making an angel to remember someone, you could use a piece of their favorite china here

Screwed the hinges into the wings first before adding a generous dollop of  tile adhesive.  I layed it on rather thick, avoiding the hinges, so that it would squirt up between the tiles and make it so I wouldn’t have to grout.

Both wings were worked on at the same time so that the coloring would come out fairly even.  If I put a pink tile on one side, I added a pink tile to the other….

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

Wings were allowed to dry overnight.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

For the body, with a jigsaw, rounded off the top edges for shoulders.  For the bottom, used my rusty woods find, to mark a line so that the bottom hem would follow the rusty thing. This too, was cut off and the edges sanded.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

The body was then sanded down, revealing the blue paint underneath.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

Since these were pieces of beadboard, they had to be attached. Up until this point, they have just been laying together, but not attached.  A piece of a Home Depot paint stirrer was cut, glued and screwed into place to secure the body.

The legs were also screwed on at this point from the back.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces

Back on the front, the door knob plate was screwed on, the hinges for the wings were screwed on and the rusty metal thingys were glued in place.

Junk Angel made from reclaimed wood, broken tile, doorknob plate 005

Almost finished…arms were painted and nailed into place.  A long screw through the top of the head holds her head in place and her halo was hot glued into place.

Junk Angel made from reclaimed wood, broken tile, doorknob plate and other rusty bits and pieces (2)

A heart was cut and the angel holds it with a wire inserted into her hands.

Junk Angel made from reclaimed wood, broken tile, doorknob plate 002

Junk Angel made from reclaimed wood, broken tile, doorknob plate 003

Junk Angel made from reclaimed wood, broken tile, doorknob plate 009

 

Junk Angel made from reclaimed wood, broken tile, doorknob plate 001

I know there are a lot of steps, but none of them are particularly hard and it’s a great way to use up those bits and pieces.

And who doesn’t need more angels in their lives? Have a wonderful week.

Ever felt an angel’s breath in the gentle breeze?

A teardrop in the falling rain?

Hear a whisper amongst the rustle of leaves?

Or been kissed by a lone snowflake?

Nature is an angel’s favorite hiding place.

~Terri Guillemets

Shared at Metamorphosis Monday, Inspire me Tuesday, Trash 2 Treasure,

Wow us WednesdaysVintage Inspiration Party, Catch as Catch Can,

DIY Sunday Showcase, Be Inspired Tuesday, Upcycled Link Party,

8 Comments

Leave a Reply to Claire Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.