2 x 4 Snowman diy



Add to Flipboard Magazine.
2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

We had about 3 inches of snow here yesterday.  It coated the roads enough to close the schools.  I don’t think it was enough to cause the normal, “I might run out of toilet paper and milk so I have to go to the store” panic though. But it was enough to get out my wooden snowman I’ve had sitting around for years.

Since he was created long before my blog ever existed ( since that has only been 5 months) and I believe,  long before blogging ever existed, I had no pictures of my guy in progress.

When I first made him there was no reason to take a bunch of pictures just in case someone ever wanted to see the steps on a blog. Blogs didn’t exist.

He may have even have been made when film was in use.  Gasp!  I really hope nobody is saying, What is film?…and since there are a lot of steps, none of them particularly hard, I decided to recreate my 2×4 snowman.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

Cut a scrap piece of  2×4 about 22 inches in length.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

 

a.  Mark on the 2×4 where you want your snowman cuts to go.  He gets cut in at the neck, hips and rounded off at the top and bottom.

b.  Use a jigsaw to make your cuts.

c.   Can also use the jigsaw to cut in a bit at the neck.  You could also do this with sander.

d.   Using a palm sander, sand down all the rough edges and neck

 

.2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

 

 

a  With a piece of scrap 1×3 wood cut out your snowman’s hat with a jigsaw curving slightly inward.

b.  Cut out the brim of your hat with any thin piece of wood you may have laying around.  This was a thin piece of pallet wood scrap 3 1/2 by 1  3/4 inches.  Just make sure the scrap you use is wider than your snowman’s head.   Sand all edges. The brim and the hat were then nailed together and painted  blue.  Any color will do, my old snowman’s hat color was green.

c.  Cut a piece for the base.  Mine was cut from a  2×5 piece of wood, the final measurements were 4 1/2 x 5 1/4 inches.  The edges were sanded and this too was painted  blue.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

 

Paint the entire snowman white.  You can use acrylic paints, ceiling paint, leftover house paint…any kind of white paint you have laying around.

When dry, paint on buttons, eyes and a mouth.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

 

Find a dowel you’d like to use for your carrot nose.  It will need to be about 2 inches in length.   If you don’t have a dowel, any stick will do, including a pencil. Sharpen the end with sandpaper, knife or  pencil sharpener. to make it look carrotish.  Paint with orange paint.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

Here, my orange nose is drying and my entire snowman’s edges have been sanded.  Holes have also been drilled for the snowman’s nose and stick arms (angled downward).

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

With a little pink lipstick smeared on with my finger, my snowman now has glowing cheeks.  A little dab of white was also added to the eyes.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

The base is now screwed on.  I used a couple of leftover decking screws.  The entire piece is given a light coat of stain wiped on with a rag.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

My snowman’s nose is now glued in place and the entire piece is speckled with white paint.  To add the snow effect, just add a couple of drops of water to white paint, dip in an old toothbrush, use your thumb to splatter the paint.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

Finish off with a scrap of  plaid material for a scarf  (about 28 x 2 inches), and a couple of stick arms.  Textured snow paint was also added to the brim of the hat, the arms and the nose.

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

2x4 projects, 2x4 snowman tutorial, snowman out of 2x4, 2x4 wooden snowman, how to make a wooden snowman, 2x4 crafts, wood scrap snowman

 

This blast of cold air makes me long for spring, but until then my snowman can make himself at home.

Shared at Handmade Hangout Party , That DIY Party , Metamorphosis Monday , Show and Share

Wow us Wednesdays, Vintage Inspiration Party  , Worthwhile Wednesdays , Treasure Hunt Thursday

Link Party PaloozaCatch as Catch Can , Party Junk and DIY Sunday Showcase

 

6 Comments

Leave a Reply to sandi Allen Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.