Pallet Wood Open Sign with Lights diy



Add to Flipboard Magazine.
Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

A while ago, I came across  a picture of an Open sign, with lights, with a red background, on wood.  Being the Scavenger that I am, my first thought was, I can make that, how hard can that be?…. I filed that idea away in the back of my mind.   I have no idea where I found that original idea and if you’ve seen something similar , let me know and I’ll give credit where credit is due.  I have tried googling “Light up open signs”, “Vintage Open signs”,  “Open signs that light up”, but I can’t seem to find that first picture that gave me a spark.

To begin this project I had to start with the lights.  I had no idea if this is something that was sold in stores or if I would have to string together my own lights.  If I couldn’t find the lights I was looking for this project would be finished before even beginning.  First place I checked out for lights was Michaels.  They had a nice selection of Halloween lights and they had just gotten their Christmas lights in.  They didn’t have what I was looking for.  Just a couple of doors down the shopping center is the local Target.  Jackpot.  They had the perfect lights.

If the globe lights are not in season at Target, I did find a set at Amazon, they can be found here… 25Ft G40 Globe String Lights with Clear Bulbs, UL listed Backyard Patio Lights, Hanging Indoor/Outdoor String Light for Bistro Pergola Deckyard Tents Market Cafe Gazebo Porch Letters Party Decor, Black

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Apparently what I was looking for were these clear Globe Lights.  A set of 25 for $12.99.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

I only needed 13 of the lights and I didn’t really want 12 empty light sockets hanging out behind my sign.  Could I cut the wire?  I know if you take even one tiny bulb out of a string of Christmas lights, the whole darn thing won’t work.  A lot of those Christmas light strings have multiple wires twisted together, this only had one.  Well here goes nothing, snip.  Well would you look at that, the lights string still works.  I did tape the end with electrical tape so I had no loose wires.  I do hope to use the remainder of the strand in the future, I’ll just see if I can find another wire with a plug.

With working lights…full speed ahead.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Googling OPEN signs, I did find an open sign I liked  here .  Perfect font for what I was looking for.  After looking through 100 different fonts to try and replicate the sign  I decided to just use this one.  On the computer  I enlarged the sign until the letters measured  9 inches high.  These were printed out on plain paper.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

The letters were cut out and placed on my 1/2 inch plywood.  Only then did I come up with my final size of my arrow.  The widest part of the arrow was 18″ and most of the length of the arrow was 14″, which gave me 2 1/2 inches  above and below my letters for my lights.  (Full size of the plywood needed was  45″ x 18″)

With the letters in place, I drew my arrow directly on the plywood.  This would be my cut line.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

 Cut out the plywood arrow with a circular saw for the long cuts and a handheld jigsaw.

.Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

To give my arrow a little more rustic feel, I once again dove into my supply of pallet wood covering my plywood arrow completely.  Once I was happy with the coverage…

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

 …I used the arrow as a template and traced my cut lines onto the pallet wood.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

The lines that were drawn with my arrow template were then cut.  Used a finishing nailer to nail all my pieces into place.  If you don’t have a nail gun, construction adhesive or finishing nails would do the trick, just make sure your finishing nails are shorter than the width of your pallet wood and backing together.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

The whole piece was painted red.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

The paper letters were once again placed over top of my arrow.  This time they were taped in place and traced around.  Once I had my outline, it was just a matter of painting in the lines.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Like my OPEN sign inspiration picture, I added a black line for shadow  effect and to give the letters a little depth.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

 Took a palm sander and sanded over the letters lightly to give a little more of that aged look.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Laid out where I thought the lights should go and adjusted them until they were about even around the entire sign.  Marked with chalk and with a  3/4 inch drill bit, I drilled my marked holes.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

As you can see, not all my holes are drilled, my battery died so I’m recharging.

Meanwhile, with scraps I had cut off  the sides of my arrow, I nailed a ridge around the entire arrow.   The ridge was placed outside the line of drilled holes, it will prevent the arrow from sitting on the wires while on the wall.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Battery finished  charging and I was able to finish drilling the holes.

With pallet wood I edged the entire sign, this hid  all the rough edges.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

We’re onto the last step.  Adding those globe lights.  Sockets were pushed all the way into the holes and the wires stapled in place.  I was considering adding another layer of plywood to conceal all my wires but I didn’t have a scrap piece large enough.  As long as it’s mounted securely on a wall it shouldn’t be needed.

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Pallet Wood OPEN Lighted sign diy, marquee open sign, open sign with lights

Shared with  Catch as Catch Can , Show me Saturday,Inspire me Monday,

Metamorphosis Monday, Inspiration MondayBest of the Nest, Much ado About Monday,

Show and ShareDIY Showoff,  Wow us Wednesdays . Vintage Inspiration Party 

Link Party PaloozaFrugal Friday , Feathered Nest Friday, Bewitchin Projects,

Thrifty Decor Chick , Wildly Original Wednesday,  Artsy Fartsy Mama,  Amaze me Monday and

redo it Yourself Inspirations

I was featured at

1-Funky_Junks_Party_Junk_link_party.29-AMmyrepurposdiySundayShowcase

Handmade-Hangout-Party-Button-Kim-featured-copylambArtsy-Fartsy Link Party

44 Comments

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.